Mengkonfigurasi Network Interface Card
- Konfigurasi kartu jaringan
— editor /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.10.6
netmask 255.255.255.0
network 192.168.10.0
broadcast 192.168.10.255
gateway 192.168.10.6
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.10.6
dns-search ns.kelompok6.com
- Konfigurasi name server
— Editor /etc/host
127.0.0.1 locqlhost
200.110.10.1 ns.kel4.net kel4
#The following lines are desirabel for IPv6 capabel hosts
::1 ip6-localhost ip6-loopback
Fe00::0 ip6-localnet
Ff00::0 ip6-mcastprefix
Ff02::1 ip6-allnodes
Ff02::2 ip6-allrouters
Ff02::3 ip6-allhosts
- Konfigurasi ip address
— Editor /etc/resolv.conf
Search ns.kel1.net
Nameseve 200.110.10.1
Membuat DNS server
- Instal paket BIND9 atau BIND
— apt-get install bind9
- Konfigurasi file named.conf
— Nano /etc/bind9/named.conf tambah
Dari scrib named.conf kit
Zone “kel4.net”{
type master;
file “/etc/bind/db.filesatu”;
};
Zone “1.168.192.in-addr.arpa”{
type master;
file “/etc/bind/db.filedua”;
};
Buat filesatu
;
; BIND reverse data file for broadcast zone
;
$TTL 604800
@ IN SOA localhost. root.localhost. (
1 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800 ) ; Negative Cache TTL
;
@ IN NS localhost.
Buat filedua
;
; BIND reverse data file for local loopback interface
;
$TTL 604800
@ IN SOA localhost. root.localhost. (
1 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800 ) ; Negative Cache TTL
;
@ IN NS localhost.
1.0.0 IN PTR localhost.
Tidak ada komentar:
Posting Komentar